UV PRODUCTS FOR THE SPOT REPAIR
Fast repair is not longer a problem, but a business opportunity with the new UV System - High Productivity.
The complete process is drastically reduced in terms of time with safe and best results.
1K Putty ready to use, very fast drying with UV Rays. [...] |
1K Filler with very high thickness, easy to apply and fast drying with UV Rays. It can be over coated with any top coat. Sanding in 3-5 minutes. *Until stock last |
Specific thinner for F01 To be used also to remove filler application fumes before sanding. |
1K acrylic clear which polymerizes by irradiation of UV Rays. Ready to use, very easy to apply without drop run. Ready for polishing after 10 minutes. |
Specific Thinner for acrylic UV clear. [...] |
Very easy to be installed, safe and handy. Weight and size are limited, conform to EU regulation. Studied for Spot Repair with a concentrated beam of light. |
Looking to our origin as a putty producer, the natural consequence is a range of products not only complete and technological innovative, but very close to the different market needs, giving always the correct answer in terms of standard quality, flexibility and fast drying.
In compliance with the 2004/42/CE directive.
Universal putty of last technology generation for any kind of support. Excellent spreadibility, compactness and easy to sand. Very good adhesion and finishing. [...] |
Polyester putty especially studied for hot temperature and flexible metals. Keeps all of the characteristics of flexible putties, but its special resin assures a shelf life of more than 2 years even by temperature with peaks over 40°C. Mixing ratio with 1-3% of paste hardener C10. |
S62 ONELIGHT PUTTY Universal putty with an ultra-light specific weight to treat every kind of surface, it characterizes for a very easy application by knife and an excellent compactness. [...] |
Polyester putty with high contents of flake alu parts in different size which give adhesion, hardness, heath and water- resistance. [...] |
Universal Putty specially designed for application on different supports, endowed with good spreadability, softness and compactness. [...] |
All purpose putty with medium specific weight for application on every kind of surface, has excellent knife application and compactness. [...] |
S71 EASYTOP PUTTY GREY Soft Polyester putty, easy to apply and extremely easy to sand. Ideal for all the metallic and fiberglass surfaces. Mixing ratio with 1-3% of paste hardener C10. |
Flexible universal putty containing dusty alu parts. Soft to apply and excellent to sand. Mixing ratio with 1-3% of paste hardener C10. |
Putty for general use. Excellent adhesion to supports and fast to dry. Good sandability. Mixing ratio with 1-3% of paste hardener C10. |
Special polyester putty reinforced with long fiberglass. Used to repair surfaces where there are holes of big imperfections. Particularly indicated on fiberglass, used as restructuring. Mixing ratio with 1-3% of paste hardener C10. |
S35 PLASTIC PUTTY
Flexible putty, recommended for the drying of plastic materials, except for polyethylene. [...]
A34 NITRO PUTTY GREY
A37 NITRO PUTTY GREEN
Creamy and soft 1K spatula putty. Ideal for shaving and retouches. Very fast drying and easy to sand. Not cracking and shrinking.
Not in conformity with the 2004/42/CE directive
S30 PUTTY FOR WOOD LIGHT
S32 PUTTY FOR WOOD DARK
S33 PUTTY FOR WOOD WALNUT
Polyester putty microfibers in wood, specific to repair and glue any wooden handiwork.
Mixing ratio with 1-3% of paste hardener C10.
F57 GT ACRYFILLER HS GREY F58 GT ACRYFILLER HS DARK GREY F59 GT ACRYFILLER HS BLACK Highsolid two component product at low content of solvent, very suitable for new jobs and repairs. Hardens very rapidly, sands very easily, not absorbing. Gives the finish an even and high gloss. Can overpainted with any type of finish. [...] |
F31 PLUS FILLER HS DARK GREY F32 PLUS FILLER HS BLACK F33 PLUS FILLER HS WHITE 2K acrylic polyurethane filler with low content of solvent. Fast drying even in humid places, good sanding quality. [...] |
2K acrylic polyurethane filler specific for 'wet onwet' use. Easy to spread and no absorption of the finishing. [...] |
2K Primer, ideal like anchoring primer on surfaces in steel, zinc sheets, aluminum. 2K vinylbutyrralic primer with high anticorrosive power and quick drying. In compliance with the 2004/42/CE directive. Mix 1:1 with C99 |
Anchoring primer for any kind of support, having high anticorrosive power . Good insulation properties on old not consolidated paintings. Can be used also in 'wet on wet' cycles. Mix 2:1 with C70 |
Polyester putty for spray application. It allows application on several layers and fast drying. It completely covers the signs of the abrasive, grain 40 and big imperfections. Easy to apply on vertical surfaces. [...] |
A12 SPOT PRIMER SPRAY LIGHT GREY 1K acrylic primer, to be used as insulator in the spot-repair. Fast drying, high anticorrosion power, good adhesion on aluminum and zinc plates. |
1K Nitrosynthetic universal insulator for general use, high filling power and fast drying. Not in conformity with the 2004/42/CE directive |
2K Acrylic clear coat UHS (Ultra High Solid), excellent for fine finishing in double coating cycles. Ideal for all kind of reparations (spot or whole car repair), where very fast drying times are required. Suitable for application on waterborne and on solventborne basecoats. [...] |
2K UHS clear coat, brand new in the field of clear coat car refinish. Its properties allow high resistance to leakages, by assuring optimal spreading qualities. [...] |
2Ultra Fast two-component clear-coat. Ideal for high quality finishes, in double layer cycles where water- or solvent-based mat basecoats are used. [...] |
![]() New generation of clear coat UHS 2k acrylic, low solvent emission (Voc 420 g/l). High gloss appearance and optimal spreading qualities are the top points. [...] |
![]() New generation of clear coat HS 2K. Very easy to apply. High level spreading and fullness. Classified as "Special Finishing" in compliance with the 2004/42/CE directive. Premium finishing: Mixing ratio 2:1 with hardeners C15/C16/C17/C22. Standard finishing: Mixing ratio 2:1 with hardeners C01/C02/C03/C30. |
2K acrylic finishing clear coat. Fast drying and fading time. Good shine, weathering resistance, resistance to yellowing and scratches. Classified as "Special Finishing" in compliance with the 2004/42/CE directive. Mix: 2:1 with C01/C02/C03/C30 |
![]() 2K matt gloss 1 acrylic clear coat, easy to apply, excellent covering, superficial hardness and aesthetic aspect. Classified as "Special Finishing" in compliance with the 2004/42/CE directive. Mix: 5:1 with C89. |
C02 FAST MS HARDENER FOR H62 C03 UNIHARDENER C30 UNIHARDENER Compatible with all clear coats or coloured finishing enamels, both acrylic and polyurethanic. Excellent resistance to yellowing. C01 Express, C02 Fast, C03 Normal, C30 Slow. |
C16 UNIHARDENER HS FAST C17 UNIHARDENER HS EXPRESS C22 UNIHARDENER HS SLOW Universal hardener compatible with all clear coats and coloured finishing enamels, both acrylic and polyurethanic. High dry residual and excellent resistance to yellowing. C22 Slow, C15 Normal, C16 Fast, C17 Express. |
![]() |
Mix 1:1. |
High quality. Not yellowing. Suitable for over coatings by basecoat. Mix 2:1 by volume. |
C68 UHS NORMAL C69 UHS FAST Hardener for clearcoat H69 Vantix. C67 slow, C68 normal, C69 fast. Mix 2:1 by volume. |
![]() Special hardener for H89 Vanity Matt Clear 1G. Use 5:1 by volume. |
![]() Water-base universal thinner suitable to be used with any hydro-dilutable paint. |
D10 NORMAL ACRYLIC THINNER D11 SLOW ACRYLIC THINNER Universal thinner for acrylic polyurethane primers, topcoats and basecoats. Easy to apply, it minimizes the creation of overspray. D09 Fast - D10 Normal - D11 Slow |
Suitable for F18 and spray polyester primers. Recommended for its prerogative not to be retained in the applied film, by ensuring fast hardening and easy sanding. |
![]() Specific for the dilution of enamels and epoxy primers. |
Fade out Thinner. |
Anti - silicone detergent Specific for the removal of every type of dirt, smokes and silicone, before painting. Its balanced evaporation allows its use in whichever season. |
![]() Water-base silicone degreaser, suitable to remove any dirt before painting. [...] |
![]() Anti-silicone liquid detergent, Gt Line. Specific for the removal of every type of dirt, smokes and silicone, before painting. |
Protective paint for anti abrasive action for car body, side band, spoiler, inside car support, trunk. Can be over coated after 30-40 minutes, with any kind of finish. |
1K polyurethane sealer very quick drying and extremely high solid contents solvent free. Suitable for high quality bead sealing and jointing of parts subject to stress. Can be used on different supports like bear metal, aluminum, cement, glass, synthetic materials. Can be repainted with any refinish top coat. |
![]() 1K quick sealer, suitable for bear metal, aluminum, cement, glass, synthetic materials. Particularly suitable for brush sealing in body shops of parts subjected to remarkable stress. Can be repainted with any refinish top coat. |
Protective paint for anti abrasive action for car body, side band, spoiler, inside car support, trunk. Can be over coated after 30-40 minutes, with any kind of finish. |
1K polyurethane sealer very quick drying and extremely high solid contents solvent free. Suitable for high quality bead sealing and jointing of parts subject to stress. Can be used on different supports like bear metal, aluminum, cement, glass, synthetic materials. Can be repainted with any refinish top coat. |
![]() 1K quick sealer, suitable for bear metal, aluminum, cement, glass, synthetic materials. Particularly suitable for brush sealing in body shops of parts subjected to remarkable stress. Can be repainted with any refinish top coat. |